1 1/8" Canti-Lever Cable Hanger

Other products in the category Brakes / Cantilever Brakes:

Tektro Aero Road Brake Levers -- These Tektro brake levers are compatible with both caliper road brakes and canti-lever cyclocross brakes. Their low friction design have a high mechanical advantage, and can significantly upgrade the braking performance of your bike without changing the calipers. Very similar in design to Campagnolo Ergo brake shift levers and Cane Creek SCR-5 aero brake levers. Well made, with resin bodies and cold-forged 6061 aluminum levers, shaped for left right hand individually. These levers also include a Campagnolo style quick release button, very handy if you are using them with older calipers that don't incorporate a quick release, or if you are using wide tires that require more clearance than a single quick release can supply. 260g Select R200 (81.9mm reach) if you have normal to large hands. Select R100 (72.2mm reach) if you have smaller hands.

Avid Shorty 4 Canti-Lever Cyclocross Brake -- Shorty brakes use tough linear springs for stiff, positive response and high straddle cable clearance to accommodate mud or fenders. The arms are easy to adjust with a screw style spring adjuster and the brake pad is a full 70mm in length providing for greater stopping power. Compatible with Road brake levers, these brakes are great for cyclocross, tandems and recumbents. This item is one brake (enough for one wheel). Order two of this item if you need brakes for a complete bike.

Avid Shorty 6 Canti-Lever Cyclocross Brake -- Designed for road brake levers Shorty brakes use tough linear springs for stiff, positive response and high straddle cable clearance to accommodate mud or fenders. The arms are easy to adjust with a screw style spring adjuster and the Rim Wrangler 2 Pads are a full 70mm in length providing for greater stopping power. Compatible with Road brake levers, these brakes are great for cyclocross, tandems and recumbents.

KORE Palmster Cyclocross Brake Lever -- These in line brake levers offer more control in technical and off camber sections by allowing you to brake from the tops of your drop bars. These high quality aluminum levers feature a 2 piece hinged clamp for easy installation and have a handy 10mm barrel adjuster. 79 grams.

OR8 Cyclocross Brake Lever -- These in line brake levers offer more control in technical and off camber sections by allowing you to brake from the tops of your drop bars. These high quality aluminum levers feature a 2 piece hinged clamp for easy installation and have a handy 10mm barrel adjuster. Compatible with 31.8 handlebars and include an adapter for 26.0 handlebars.

1 1/4" Ritchey Logic Canti-Lever Cable Hanger -- These light weight aluminum cable hangers are compatible with 1 1/4" headsets / fork steer tubes. These keyless cable hangers secure in place with a bolt and drop down to accomodate cable routing.

1" Ritchey Logic Canti-Lever Cable Hanger -- These light weight aluminum cable hangers are compatible with 1" THREADED headsets / fork steer tubes. These keyed cable hangers secure in place under the headsets top nut and drop down to accomodate cable routing.

Rear Canti-Lever Brake Cable Hanger -- These rear hangers mount on most seat binder bolts to allow the use of canti-lever brakes. Great for cyclocross!

Avid 20R Mountain Bike V Brake Pads -- One-piece brake block compatible with all V brakes and Avid Shorty Canti-lever brakes. uses same compound as Avid Rim Wranglers. This item includes pads for a single brake. If you need enough pads for a complete bike order two of this item.

Avid Rim Wrangler II V Brake Pad Inserts -- Rim Wrangler 2 pad inserts use a universal footprint - which means they will fit both Avid and Shimano pad holders. If you need enough pads for a complete bike order two of this item.

Avid Rim Wrangler II V Brake Pads w/ Holders -- The Rim Wrangler 2 pads use a universal footprint - which means they will fit Avid and Shimano pad holders. This makes the choice clear when replacing pads. The Avid Rim Wrangler 2 include the Avid cartridge pads as well as the holder. Narrow Profile Maximizes the opening between pads to allow easier wheel removal. If you need enough pads for a complete bike order two of this item.

Gray Matter Mountain Bike Brake Pads -- Dia-Compe Gray Matter Brake Pads are compatible with all Cantilever brakes. They feature a specially formulated gray friction compound for the ultimate in stopping power. This item includes pads for 2 brakes both front and rear. Excellent for cyclocross!

Ritchey Logic Canti Lever CycloCross Brake Pads -- These brake pads are All Right, No really all 4 pads are right side pads. Both sides are symmetrical so it really doesn't make a difference. If you need a great deal on some great pads look no further. Black normal conditon compound. Replaces any canti-lever brake pad with a non-threaded post. Advanced stopping compound. Shaped for easier wheel removal. Pad designed to reduce brake chatter.

Dia-Compe Canti-lever Cable Yolks -- Dia-Compe canti-lever cable yolks are some of the best on the market! Wide platform provides solid support for great braking power with cyclocross brakes. Sold in pairs, includes cable ends.

Shimano Canti Cable Yolks -- Shimano canti-lever cable yolks are some of the most common on the market, plus they are super light weight! Use them on MTB or Cyclocross bikes. Sold individually, if you need enough for a complete bike please order 2.

Shimano Canti-Lever Brake Straddle Cable -- These straddle cables are what you need to set up canti-lever cyclocross brakes properly, cable yolks sold separately. Order two of this item if you need enough for a complete bike.

Shimano SLR Road Brake Cable Sets -- These Shimano Road Brake Cable Sets include teflon lined housing and are and just like the original cable and housing that comes with Shimano Ultegra and Dura-Ace components. Complete set of front and rear brake cable and housing. (Housing Length/Cable Length) in centimeters.

Alligator PTFE Teflon Coated Bike Brake Cable 1.5 X 1700mm -- This high quality low friction cable is available in Black (Teflon PTFE coating). Corrosion resistant and low-friction these cables are compatible with mountain and BMX bikes and come Pre-stretched. Pre-stretched cable makes for more precise and responsive braking than other cable. Housing sold separately. Sold individually. - BLACK 1.5 X 1700mm - MTB & BMX Compatible

JagWire Brake / Derailleur Cable Housing -- JagWire teflon lined housing in XTR Gray. Available in 25 feet or 50 METERS, stock up now and SAVE BIG! Housing of this quality normally sells for $2 - $3 per foot.

JagWire Mountain Bike V Brake Rebuild Kit -- This JagWire brake rebuild kit includes 1.6mm front and rear mountain bike brake Teflon cables, 8 sealed ferrules, two 90 degree V-brake noodles, and 2 V-brake boots. This kit includes all the small parts you need to rebuild your V brakes. Compatible with all brands of V-brakes including Shimano, Avid, Koski, and others. Next time you rebuild your brakes use this kit to seal out the dirt and grime and you won't have to rebuild as often.

JagWire PVDF Slick Bike Brake Cable 1.6 X 1700mm -- This high quality low friction cable is available in Yellow (Kynar PVDF coating). Corrosion resistant and low-friction these cables are compatible with road, mountain, and even BMX bikes and come Pre-stretched. Pre-stretched cable makes for more precise and responsive braking than other cable. Housing sold separately. Sold individually or by the case. - Shimano, SRAM, & Campagnolo Compatible

Shimano SLR Brake 5mm Cable Housing -- Shimano teflon lined housing will make your bike brake and shift like new again. Available in 60 inch lengths (enough to redo 1 bike's brakes) or 25 - 30 feet which will take care of 5 times that, stock up now and SAVE BIG! Housing of this quality normally sells for $2 - $3 per foot.

Clarks Brake / Derailleur Cable Tips -- Cable tips slide over the ends of your cables. They then crimp into place and prevent your cables from fraying. Compatible with both brake and derailleur cables. 50 per package.

JagWire 5mm Plastic Ferrules -- Required for coated cables. These plastic ferrules keep the teflon coating from being scratched off. Compatible with 5mm cable housing.

JagWire 5mm Sealed Ferrules -- Compatible with 5mm brake housing. These ferrules are specially designed to seal out dirt and grime.

JagWire Brake / Derailleur Cable Silencers -- These little rubber doughnuts keep your cables quiet when you hit those nasty bumps as well as prevent scratching. Stock up now and SAVE BIG!

JagWire Lube Tube Cable Ferrules -- Fits into adjusters at control levers and cable stops. Oil port allows for a quick application of oil directly to brake and derailleurs cables while the included boot seals oil inside the housing.

JagWire Lube Tube Refill Kit -- JagWire lube greatly reduces friction and improves cable performance. Use with Lube Tube ferrules to keep your bike running smooth and fast!

IceToolz 4th Hand Bike Brake Tool -- The 4th hand brake tool pulls both gear and brake cables tight and allows for easy adjustment of brakes and derailleurs. It is a tremendous timesaver when working on brakes and allows you to pull the cable tight with one hand while tightening the anchor bolt with the other. Includes a thumb lock that keeps your cables snug while your hands are free to tighten bolts and nuts. Works great for tightening zip ties too! A great quality tool at a fraction of the price of a Hozan, Pedros, or Park Tool BT-2.

IceToolz SIS Cable Cutter Bike Tool -- These shop quality cable cutters are perfect for cutting Shimano SIS cable and SP housing. In fact they are so good they work on spokes too! Don't try that with a cheap consumer cable cutter.

Related Products

Kore 1 1/8 Inch Threadless Road Bike Stem