Aheadset 1 1/8th Headset Top Cap w/ Star Nut

~~$15.00~~ $4.50 -- Includes Bolt and Star Nut

Purchase Aheadset 1 1/8th Headset Top Cap w/ Star Nut

Aheadset 1 1/8" Aluminum Top caps include a bolt and Star nut. Compatible with all 1 1/8 inch stems and headsets.

Purchase Aheadset 1 1/8th Headset Top Cap w/ Star Nut

Other products in the category Headsets / 1 1/8 Inch:

1 1/8" Threaded Ritchey Logic Headset -- Threaded headset designed for affordable, long-lasting performance. Use of 1/8" bearings in the top and 3/16" bearings in the bottom cups increases strength and durability while saving weight. - All steel - 130 grams

Cane Creek C2 Threadless Aheadset -- These threadless headsets feature the same airtight design as Cane Creek’s famous S-5 headset. The C-2 features light aluminum cups, sealed cartridge bearings for superior load handling and a steel crown race. low 26.5mm stack height. 140g Top cap and star nut included.

1 1/8" Campagnolo Record Headset -- Campagnolo Record Hiddenset 1-1/8" threadless headset, requires head tube designed for internal headset. TTC (Tall Top Cap) top bearing cap is 10mm taller to reduce the need for spacers; additional spacers can be added 42mm head tube I.D. Headset Type: Integrated, 42.0mm OD bearing crown Race: 30.0 Stack Height: 5.9 mm Weight: 75 grams

1 1/8" Cane Creek S-6 Aheadset -- The Cane Creek S-6 Threadless Headset uses 7075-aluminum head cups, stainless steel bearings and crown race, all this adds up to a quality lightweight headset. Solos and S-6 use 7075-aluminum head cups, stainless steel bearings and crown race. All models include adjusting bolt, star nut, and aluminum top cap. Stack Height: 26.6 mm Bearing Type: Cartridge Weight: 110 grams Material: 775 Aluminum Steerer Tube: 1 1/8" Threadless

1 1/8" Cane Creek SP Aheadset -- Forged and CNC machined 6061/T6 aluminum cups. TH brand cartridge contact Bearings 7075 aluminum crown race. Includes 3T Laser etched aluminum top cap, star nut, and titanium bolt. 1 1/8", 115g.

1 1/8" Columbus Integrated Headset -- The Integrated Headset from Columbus is designed to continue the contoured shape of the Integrated Head Tube. The Columbus design can be replaced easily if damaged or worn. This helps extend the life of frames that require the use of integrated headsets. Includes a 3T top cap with titanium bolt and a star nut. Compatible with 1 1/8" steer tubes.

1 1/8" FSA Orbit MX Bike Headset -- New modern and stylish shape Forged and CNC machined 6061/T6 aluminum cups Patented alignment tip for increased durability and performance TH brand 36 degree Micro Angular Contact Bearings 7075 aluminum crown race Laser etched aluminum top cap 1 1/8" size Stack Height* - 19+13.4=32.4mm Black anodized finish Weight - 98 grams. Available with a special Top Cap specifically designed to minimize damage to forks with carbon steer tubes, as a safer alternative to star-flanged nuts. Compatible with 1 1/8" carbon steer tubes.

1 1/8" FSA Orbit XL II Bike Headset -- The Orbit XL II is forged and CNC machined from 6061-T6 aluminum. Patented alignment tip for increased durability and performance. TH Brand 36 degree Angular Contact sealed bearings. Laser etched aluminum top cap and split 7075 aluminum crown race. - Laser etched aluminum top cap - 27.5mm Stack Height - 101 grams

1 1/8" Kontak DL Bike Aheadset -- This light weight race quality headset is factory equipment on some of the world's best race bikes! It features Alloy cups, with super smooth double sealed cartridge bearings. Manufactured under license from Tange Japan. 80g Includes top cap and star nut, not pictured.

1 1/8" Ritchey Logic Zero Pro Integrated Press Fit Headset -- The Integrated Headset from Ritchey is designed to continue the contoured shape of the Integrated Head Tube. Includes a Ritchey top cap with bolt and a star nut. Compatible with 1 1/8" steer tubes. - Press Fit, Z Cup, 45 deg Chamfer - Full complement angular cartridge bearings - Compatible popular integrated headset designs - 2014 Alloy cup version

3T 1 1/8th Headset Top Cap -- 3T 1 1/8" Aluminum Top caps include a titanium bolt! Star nuts are sold separately.

FSA Compressor 1 1/8 Inch Top Cap w/ Wedge -- These Top Caps are specifically designed to minimize damage to forks with carbon steer tubes, as a safer alternative to star-flanged nuts. Compatible with 1 1/8" carbon steer tubes. Includes top cap, adjuster bolt and expander. Weight 34grams.

FSA Compressor Pro Carbon 1 1/8 Inch Top Cap -- These Top Caps are specifically designed to minimize damage to forks with carbon steer tubes, as a safer alternative to star-flanged nuts. Compatible with 1 1/8" carbon steer tubes. Includes top cap, adjuster bolt and expander. Weight 34grams.

Headset Star Nut -- Star nuts are for use with threadless headsets. Not recommended for use on forks with carbon steer tubes.

Ritchey 1 1/8th Headset Top Cap w/ Star Nut -- Ritchey 1 1/8" Aluminum Top caps include a bolt and Star nut as well as a rubber plug to keep moisture out of your allen bolt. Compatible with all 1 1/8 inch stems and headsets.

Robinson Headset Top Cap -- These Aluminum Top caps are available in a variety of colors. Includes a bolt, Star nuts are sold separately.

Schwinn Home Grown Top Cap -- These 1 1/8" Aluminum Top caps are available in a variety of colors. Includes a bolt, Star nuts are sold separately.

Titec Headset Top Cap -- These Aluminum Top caps are available in a variety of colors. Includes a bolt, Star nuts are sold separately.

1 1/8" Canti-Lever Cable Hanger -- These light weight aluminum cable hangers are compatible with 1" or 1 1/8" headsets / fork steer tubes. These keyless cable hangers secure in place with a bolt and drop down to accomodate cable routing.

Aluminum Headset Spacer -- Available in 2mm, 5mm, and 10mm in your choice of 1" or 1 1/8". These headset spacers are just what you need to get your bars and stems higher.

Lizard Skins Headset Seals -- 1 pair of neoprene headset seals that velcro on to your headset for additional protection from mud and grime. Compatible with most headsets.

1 1/8 Inch Carbon Headset Spacer -- Available in 5mm, 8mm, 10mm, and 20mm in 1 1/8 inch. These headset spacers are just what you need to get your bars and stems adjusted to the proper height. Special pricing on 8mm while supplies last!

Phil Wood Water Proof Grease 3 oz Tube -- Phil Lube has achived the premium lubriacnt classification rating by all major bearing manufacturers world-wide. The perfect grease for those of us who prefer to rebuild, rather than replace. For use on bearings in hubs, headsets, and bottom brackets.

Cyclo Headset Wrench Bike Tool -- Cyclo Total Lazer tools are the first totally lazer cut spanners in the bike industry. In fact they are so well made they carry a lifetime warranty. Made in the UK.

Industrial Quality Threadless Nut Setter -- The same one used in factories to install star nuts in forks quickly, no threading required. This Threadless Nut Setter is used to install the star-fangled nut found on AheadSet and other threadless headset systems. Sets the star-fangled nut to 15mm and keeps it straight.

Park Tool HCW-9 Headset Wrench -- New Old Stock 31mm and 40mm headset wrench. Park Tool's popular and versatile Head Wrenches feature their proven head design. It takes longer, and costs more, but it’s worth the extra effort. You usually need 2 of these to get your headset locknut really tight. Made In The USA.

Park Tool RT-1 Headset Cup Remover -- This handy tool makes headset cup removal easy. Just pull it through the frame and tap the tool head to knock the cup loose. Fits standard and oversize headsets. Constructed of strong, heat treated alloy steel with a nickel finish for durability.

Park Tool SG-6 Saw Guide -- Designed to ensure a straight, clean cut on threadless forks, the SG-6 fits 1", 1-1/8" and 1-1/4" forks. A must for use with threadless fork systems. Simply slide the guide onto any threadless fork, clamp it down, and cut using the narrow cutting slot. Heat treated for long life.

Park Tool TNS-1 Threadless Nut Setter -- The Threadless Nut Setter is used to install the star-fangled nut found on AheadSet and other threadless headset systems. Thread the nut onto the TNS, insert into the fork stack, and tap it in with a hammer. Sets the star-fangled nut to 15mm and keeps it straight.