Campagnolo Chorus 2006 D Brakeset F+R

Purchase Campagnolo Chorus 2006 D Brakeset F+R

One of the best values in a set of calipers, Chorus remains unchanged for 2005 with stainless steel pivot bearings in Record castings (hidden pivot bolt), and the new Differential brake design with a single pivot rear brake saving 40 grams over the dual pivot front/rear offering. Sold as a pair (front and rear). Made in Italy.

- Short reach (40-50mm) only.
- Dual pivot front and rear.
- Weight 340 grams.

Purchase Campagnolo Chorus 2006 D Brakeset F+R

Other products in the category Brakesets / Road Bike Caliper Brakes:

Tektro Aero Road Brake Levers -- These Tektro brake levers are compatible with both caliper road brakes and canti-lever cyclocross brakes. Their low friction design have a high mechanical advantage, and can significantly upgrade the braking performance of your bike without changing the calipers. Very similar in design to Campagnolo Ergo brake shift levers and Cane Creek SCR-5 aero brake levers. Well made, with resin bodies and cold-forged 6061 aluminum levers, shaped for left right hand individually. These levers also include a Campagnolo style quick release button, very handy if you are using them with older calipers that don't incorporate a quick release, or if you are using wide tires that require more clearance than a single quick release can supply. 260g Select R200 (81.9mm reach) if you have normal to large hands. Select R100 (72.2mm reach) if you have smaller hands.

Tektro Triathlon RX 4.1 TT Brake Levers -- These Tektro RX 4.1 brake levers are compatible with caliper road brakes. Their low friction design have a high mechanical advantage, and can significantly upgrade the braking performance of your bike without changing the calipers. Very similar in design to Cane Creek 200TT Brake Levers. Well made, with cold-forged 6061 aluminum levers.

Campagnolo Centaur D Skeleton Brakeset F+R -- New 2007 Centaur Skeleton brakes eliminate material where it is not needed, offering high performance with a lower weight. The brake arms are more rigid and lighter than their predecessors. The front brake is a more powerful dual pivot, while the rear one has been lightened by going to a single pivot design which also reduces the possibility of wheel locking. - Cartridge Brake Pads. - 40 to 50mm reach. - Sold in sets (Front & Rear)

Campagnolo Centaur Dual Pivot Brakeset F+R -- True Campy fit and finish. Centaur is the beneficiary of design, technology, and materials originally created by Campagnolo for their high-end Record components. Centaur brake pads have orbital adjustability and accept a brake shoe that is longer and slightly curved as compared with other designs. This allows more brake surface area to contact the rim which makes for more powerful braking. Centaur dual pivot brakes have the shiny silver anodized finish and are even compatible with Chorus, Veloce, Mirage and other models. - Cartridge Brake Pads. - 39 to 49mm reach. - Sold in sets (Front & Rear)

Tektro RX40 Omega Single Pivot REAR Brake Caliper -- Tektro's top of the line road caliper set. The Tektro RX40 Omega Road Caliper Brake features recessed mounting bolts. Short reach 39-49mm. Single Pivot brake. Set weighs in at 312 grams. Tektro is the largest brake maufacturer in the world. They manufacture brakes for most of the bicycle industry. These feature single pivot action with compact low flex arms. Includes cartridge brake shoes pads. These can sometimes be used as fronts with the extra long brake bolts we sell. Rear Brake only... For this price buy them for parts or even just the pads!

Shimano 105 BR-5600 BrakeSet -- The 105 Dual-Pivot brake design is a lightweight, compact and durable braking system. Through advancements in design, tighter tolerances have been created which creates a firm and instantaneous braking response. Also by integrating a convex washer to the fixing bold of the brake pad, adjustment for toe-in is much easier allowing you to set your own braking preference. 39-49mm reach.

Campagnolo Brake Adjusting Barrel with Nut -- Cable adjusting barrel with nut for use with Record, Chorus, Centaur, and Veloce brake calipers. Compatible with many other brands as well. Sold individually, buy 2 of this item if you need enough for a complete bike.

Campagnolo Ergo Power Brake / Derailleur Cable Set -- Campy cable and housing sets are just like the originals that came with your Campy components. Compatible with road bikes only. Complete replacement brake and gear inner & outer. - Pre-lubricated casing. - Stainless steel inner wires. - Pre-stretched.

JagWire Brake / Derailleur Cable Housing -- JagWire teflon lined housing in XTR Gray. Available in 25 feet or 50 METERS, stock up now and SAVE BIG! Housing of this quality normally sells for $2 - $3 per foot.

JagWire Galvanized Cable (100 per box) -- Quality repair cables at a fraction of their retail price. These cables have have soldered ends, are pre-stretched. - Housing Sold Separately

JagWire PVDF Slick Bike Brake Cable 1.6 X 1700mm -- This high quality low friction cable is available in Yellow (Kynar PVDF coating). Corrosion resistant and low-friction these cables are compatible with road, mountain, and even BMX bikes and come Pre-stretched. Pre-stretched cable makes for more precise and responsive braking than other cable. Housing sold separately. Sold individually or by the case. - Shimano, SRAM, & Campagnolo Compatible

Shimano SLR Brake 5mm Cable Housing -- Shimano teflon lined housing will make your bike brake and shift like new again. Available in 60 inch lengths (enough to redo 1 bike's brakes) or 25 - 30 feet which will take care of 5 times that, stock up now and SAVE BIG! Housing of this quality normally sells for $2 - $3 per foot.

Shimano SLR Road Brake Cable & Housing Set -- These Shimano Road Brake Cable Sets include teflon lined housing and are and just like the original cable and housing that comes with Shimano Ultegra and Dura-Ace components. Complete set of front and rear brake cable and housing. (Housing Length/Cable Length) in centimeters.

Shimano Stainless Steel Brake Cable -- These Brake Cables are just like the original ones that come with Shimano Deore XT, Ultegra, and Dura-Ace components. Stainless steel brake cables have soldered ends. Housing Sold Separately

Clarks Brake / Derailleur Cable Tips Bag/50 -- Cable tips slide over the ends of your cables. They then crimp into place and prevent your cables from fraying. Compatible with both brake and derailleur cables. 50 per package.

JagWire 5mm Sealed Ferrules -- Compatible with 5mm brake housing. These ferrules are specially designed to seal out dirt and grime.

JagWire Brake / Derailleur Cable Silencers -- These little rubber doughnuts keep your cables quiet when you hit those nasty bumps as well as prevent scratching. Stock up now and SAVE BIG!

JagWire Lube Tube Cable Ferrules -- Fits into adjusters at control levers and cable stops. Oil port allows for a quick application of oil directly to brake and derailleurs cables while the included boot seals oil inside the housing.

JagWire Lube Tube Refill Kit -- JagWire lube greatly reduces friction and improves cable performance. Use with Lube Tube ferrules to keep your bike running smooth and fast!

Aluminum Road Bike Brake Mounting Nut -- This aluminum recessed nut is designed for use on road brake center pivot bolts. 30mm long, for thicker aluminum and carbon fiber forks. Also may be required for rear brakes on some carbon fiber frames with thick carbon wishbone seat stays. You can sometimes use this bolt to also convert rear brake calipers to fronts. Aluminum bolts are sold individually. Not compatible with all forks.

Campagnolo Road Bike Recessed Brake Bolt Set -- These aluminum recessed nuts are just like the originals that come with Campy road brake center pivot bolts. These are not the super long ones that are required for some carbon forks. Sold in sets of 2.

Titanium Road Bike Brake Mounting Nut -- This Titanium recessed nut is designed for use on road brake center pivot bolts. 23mm long, for thicker aluminum and carbon fiber forks. Also may be required for rear brakes on some carbon fiber frames with thick carbon wishbone seat stays. Titanium bolts are sold individually.

Dia-Compe Brake Lever Hoods -- New Old Stock Dia-Compe brake lever hoods for traditional cable routing. Fits Dia-Compe and some Campy standard brake levers.

Road Bike Brake Caliper Washer -- These washers allow for easy centering of your road brake calipers by allowing a little extra room for that Park OBW offset wrench.

Allen Wrench Metric -- If you have older Campy brakes than you know just how hard it is to find a half millimeter allen wrenchs when you need one. Even if you have one already (somewhere?) it never hurts to have an extra.

IceToolz 4th Hand Bike Brake Tool -- The 4th hand brake tool pulls both gear and brake cables tight and allows for easy adjustment of brakes and derailleurs. It is a tremendous timesaver when working on brakes and allows you to pull the cable tight with one hand while tightening the anchor bolt with the other. Includes a thumb lock that keeps your cables snug while your hands are free to tighten bolts and nuts. Works great for tightening zip ties too! A great quality tool at a fraction of the price of a Hozan, Pedros, or Park Tool BT-2.

IceToolz SIS Cable Cutter Bike Tool -- These shop quality cable cutters are perfect for cutting Shimano SIS cable and SP housing. In fact they are so good they work on spokes too! Don't try that with a cheap consumer cable cutter.

Park Tool OBW-3 14mm Offset Brake Wrench -- We call these our offset wrenches because of their unique design, which allows them to be used in tight places, such as centering caliper brakes. OBW-3 has a 14mm opening, and the other end fits into the tension springs to rotate the brake on its bolt.

Related Products

Titanium Road Bike Brake Mounting Nut