Campagnolo Record Carbon Seat Post

Purchase Campagnolo Record Carbon Seat Post

Featuring a single bolt carbon micro-adjust saddle clamp perfect for getting your saddle further back and full carbon-fiber shaft construction for superior strength, this lightweight seatpost fits all 27.2 frames. Thanks to its 250mm length it offers great adjustability for all riders. Finished in a clear gloss. Includes a clamp that fits from 31.6-31.9mm outer seat tube diameter.

- 27.2mm diameter X 250mm Length
- Forged aluminum head
- Carbon fiber shaft
- Weight: 180 grams

Purchase Campagnolo Record Carbon Seat Post

Other products in the category Seat Posts:

3T Doric Team Seat Post 31.6 350mm -- Italian, Formula-1 design with carbon fiber mast and aluminum head/clamp. Steel, 2-bolt micro-adjust head/clamp assembly with 0-degree setback. 165g: gloss carbon weave with red/white graphics.

Felt 6061 T6 Carbon Seat Post -- Featuring an alloy micro-adjust saddle clamp for perfect saddle positioning and 6061 T-6 aluminum shaft wrapped in carbon-fiber for superior strength, this lightweight seatpost fits all 27.2 frames. Thanks to its 250mm length it offers great adjustability for all riders. Finished in a clear gloss. - 27.2mm diameter X 250mm Length - Forged 6061-T6 aluminum head - 6061 T6 / Carbon fiber shaft - Weight: 220 grams

Felt Full Carbon Shaft Seatpost -- Featuring an small 2 bolt alloy micro-adjust saddle clamp for perfect for getting your saddle further back and full carbon-fiber shaft construction for superior strength, this lightweight seatpost fits all 27.2 frames. Thanks to its 250mm length it offers great adjustability for all riders. Finished in a clear gloss. - 27.2mm diameter X 250mm Length - Forged 6061-T6 aluminum head - Carbon fiber shaft - Weight: 200 grams

FSA AAA SeatPost 26.8 300mm Black 2-Bolt -- Features zero set-back for maximum strength to weight ratio - Freeride strong but road/XC light - Durable one-piece mast and head - 3-D forged and CNC machined AL2014 - Quadruple-butted shaft - DATA™ (Dual Adjust Tilt Angle) security system - M5 chromoly and stainless steel hardware

FSA FR-230 Alloy Seatpost -- Features zero set-back for maximum strength to weight ratio - Freeride strong but road/XC light - Durable one-piece mast and head - 3-D forged and CNC machined AL2014 - Quadruple-butted shaft - DATA™ (Dual Adjust Tilt Angle) security system - M5 chromoly and stainless steel hardware - 27.2 mm x 350 mm - 260 grams

FSA SL-K Alloy / Carbon Seatpost -- The FSA SL-K seatpost has a one-bolt saddle clamp with setback making it a good choice for most cyclists. 6061-T6 alloy and carbon fiber 3K weave tubular construction. One-bolt clamp with CroMoly hardware. - 350mm post length - 240 gram

Kore 380mm Forged Aluminum Seatpost -- The KORE Forged seatpost measures 380mm in length and comes with laser etched logos! These seatposts have a single bolt for easy adjustment and is available in black or silver. 26.8 / 27.2 / 31.6 sizes weigh in at 285 / 290 / 305g respectively.

Kore I-Beam 30.9 Carbon Elite Seat Post 300mm -- I Beam is a new seat / seatpost interface by SDG that requires an I Beam Kore or SDG seat. Instead of saddle rails, the seat has a long I-Beam section. I Beam allows for a wider range of adjustment.

Kore I-Beam 31.6 Carbon Elite Seat Post 300mm -- I Beam is a new seat / seatpost interface by SDG that requires an I Beam Kore or SDG seat. Instead of saddle rails, the seat has a long I-Beam section. I Beam allows for a wider range of adjustment.

Kore I-Beam 31.6 Race Seat Post 300mm -- I Beam is a new seat / seatpost interface by SDG that requires an I Beam Kore or SDG seat. Instead of saddle rails, the seat has a long I-Beam section. I Beam allows for a wider range of adjustment.

Kore I-Beam Seat Post Adapter Kit

Proponent Micro Adjust Seatpost -- Proponent micro adjust seatposts have a unique clamp design that allows you to dial in your seat position. Never again will the nose of your seat be a bit too high or low! Made from 2014-T6 heat treated aluminum.

Race Face Evolve XC Seat Post -- - 27.2 X 350mm - Forged from 6061 aluminum, the seatpost head is incredibly strong and fatigue resistant. - Patent pending head design is lightweight and distributes loads more efficiently than conventional seatpost head designs. - Offers unprecendented adjustibility - with infinite tilt adjust ment completely independent from the fore / aft adjustment. - The head accomodates 7mm and 8mm rails while providing 35mm of rail support. - Features a 0.5" rearward offset. - Oval tubing optimizes strength to weight ratio and provides consistently high strength throughout the length of the tube allowing you to clamp the post down at any height. - The 3d forged 2014 heat treated aluminum tube is anodized and shot peened for increased fatigue life.

Ritchey Logic Comp Bike Seatpost -- This Ritchey seatpost features a single bolt for easy adjustment! Offset head design. 6061-T6 aluminum forged construction.

SR Sakae Seatpost -- This SR Sakae seatpost is manufactured by one of the largest seatpost manufacturers in the world. It features a single bolt for easy adjustment, and lots of offset!

Titec 6061-T6 Bike Seatpost -- 2 bolt micro adjust head make it a snap to dial in your seat angle. Forged 6061 heat-treated aluminum shaft combines durability and quality for a great price! Twin-bolt, micro-adjust design Very tough construction 290g (27.0mm) 350mm length 0.75" (19mm) offset

Titec 7075-T6 Bike Seatpost -- Titec uses top quality 7075 T6 aluminum alloy for light weight and beauty. Available in satin silver or black finish to compliment any bike. 2 bolt micro adjust head make it a snap to dial in your seat angle. 235g (270mm / 27.2mm) 245g (350mm / 26.8mm) 0.75" (19mm) offset

Titec Knock DH 7075-T6 Bike Seatpost -- This Knock-Rated seatpost redefines the meaning of tough! The backset & oversized forged alloy Hawk clamp bites hard into seat rails for slip-proof performance, and the 7075-T6 heat treated aluminum shaft is as strong as they come! 340g (390mm / 27.2mm) 0.75" (19mm) offset

31.9mm Silver Aluminum Seatpost Clamp -- The slim design of this seatpost clamp not only shaves weight but it looks great too. Available in 31.9mm clamp diameter in silver. Compatible with 25mm seat binder bolt sold separately.

32mm Black Aluminum Seatpost Clamp -- The slim design of this seatpost clamp not only shaves weight but it looks great too. Available in a 32mm clamp diameter in a black sandblast finish that matches the Kore Forge seatposts and Syncros handlebars we sell.

Sugino Seat Binder Bolts -- CroMo Seat Binder Bolts available in 19mm.

Thomson Seat Post Bolt -- BOLT/NUT/WASHER SET Compatible with ALL Thomson seat posts and even some others.

Titanium Bike Seat Binder Bolt -- These lightweight seat binders feature a knurled end nut eliminating the need for an extra wrench. Aluminum nut and cup washer with a Titanium bolt.