PARK TOOL CCP-4 SPLINED TAPER CRANKSET PULLER

Purchase PARK TOOL CCP-4 SPLINED TAPER CRANKSET PULLER

Park’s CCP-4 has been specifically designed to remove the new Shimano splined cranks, oversized pipe billet spindles and ISIS splined crank systems. The CCP-4’s long, dipped vinyl handle provides a comfortable grip and plenty of torque, while Park’s own rotating tip delivers smooth operation and a long, trouble-free life. Note: the CCP-4 will not fit standard square bottom bracket spindles.

Purchase PARK TOOL CCP-4 SPLINED TAPER CRANKSET PULLER

Other products in the category TOOLS / CRANK & CHAINRING TOOLS:

SHIMANO TL-UN75 BIKE CRANK TOOL -- Designed for use in conjunction with TL-UN96BBT-8 Parkor equivelent bottom bracket tool, sold separately. For removal and installation of FCM750/FCM739/FCM570/FCM569/FCMC40 inner chain rings. Prevents slipping and damaging your expensive cranks.

TOOL ADJUSTABLE PIN SPANNER SPA-6 PARK

TOOL CHAINRING BOLT SPANNER PARK CNW-2 -- This handy tool fits securely into the slots on the reverse side of a chainring bolt so it doesn't spin when loosening the bolt. Designed specifically for the job, the CNW-2 makes removing chainring bolts much easier. (Chainring bolts not included)

TOOL CRANK PULLER PARK CCP-22 SQUARE

TOOL CRANK PULLER PARK CCP-44 SPLINED

TOOL CRANK PULLER PARK CWP-7 -- The universal design of the CWP-7C has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square taper and splined (ISIS Drive, Octalink) crank arms. The CWP-7C will replace the current CWP-6C

TOOL CRANK PULLER PROW14-15&8MMHEX

TOOL CRANK PULLER w/ HANDLE

TOOL CRANK WRENCH PARK CCW-5 14MM/8MMHEX

TOOL HCW4 CRANK WRENCH PIN SPANNER/36MM

TOOL HCW5 CRANK LOCK RING-SPANNER/32MM O