Park Tool SG-6 Saw Guide

Purchase Park Tool SG-6 Saw Guide

Designed to ensure a straight, clean cut on threadless forks, the SG-6 fits 1", 1-1/8" and 1-1/4" forks. A must for use with threadless fork systems. Simply slide the guide onto any threadless fork, clamp it down, and cut using the narrow cutting slot. Heat treated for long life.

Purchase Park Tool SG-6 Saw Guide

Other products in the category Tools / Headset Tools:

Cyclo Headset Wrench Bike Tool -- Cyclo Total Lazer tools are the first totally lazer cut spanners in the bike industry. In fact they are so well made they carry a lifetime warranty. Made in the UK.

Park Tool HCW-7 Headset Wrench -- New Old Stock 30mm and 32mm headset wrench. Park Tool's popular and versatile Head Wrenches feature their proven head design. It takes longer, and costs more, but it’s worth the extra effort. You usually need 2 of these to get your headset locknut really tight. Made In The USA. This tool is used for adjusting most 1 inch threaded headsets. 30mm is common on one-piece bottom bracket locknuts and older US made Schwinn headset locknuts.

Park Tool HCW-9 Headset Wrench -- New Old Stock 31mm and 40mm headset wrench. Park Tool's popular and versatile Head Wrenches feature their proven head design. It takes longer, and costs more, but it’s worth the extra effort. You usually need 2 of these to get your headset locknut really tight. Made In The USA.

Park Tool RT-1 Headset Cup Remover -- This handy tool makes headset cup removal easy. Just pull it through the frame and tap the tool head to knock the cup loose. Fits standard and oversize headsets. Constructed of strong, heat treated alloy steel with a nickel finish for durability.

Park Tool SG-3 Saw Guide -- Cutting guide for 1-1/4" diameter fork. Cut any 1-1/4" x 26 tpi fork quickly and easily with this handy fork stack cutting guide. Heat treated for long life, the guide cleans the freshly cut threads upon removal so headset parts install easily. Cut as little as 1mm from the fork.

Park Tool TNS-1 Threadless Nut Setter -- The Threadless Nut Setter is used to install the star-fangled nut found on AheadSet and other threadless headset systems. Thread the nut onto the TNS, insert into the fork stack, and tap it in with a hammer. Sets the star-fangled nut to 15mm and keeps it straight.