Shimano 105 FD-5600 Front Derailleur

Other products in the category Drivetrain / Road Derailleurs:

Shimano SIS SP41 4mm Derailleur Cable Housing -- Shimano teflon lined housing will make your bike brake and shift like new again. Available in 60 inch lengths (enough to redo 1 bike's derailleurs) or 25 - 30 feet which will take care of 5 times that, stock up now and SAVE BIG! Housing of this quality normally sells for $2 - $3 per foot.

Shimano 105 FD-5500 Series Front Derailleur -- These shimano 105 front derailleurs are compatible with 9 speed rear derailleurs and Tiagra / 105 / Ultegra / and Dura-Ace Shifter Levers.

Shimano Dura-Ace 7700 Front Derailleur -- Shimano's top of the line racing front derailleur! Nickel plated alloy chain cage reduces weight and increases abrasion resistance. The extra-wide pivot link increases overall stiffness and shifting quality. Designed specifically for use with Shimano SG-X chainrings. Compatible with 105 and Ultegra shifters too! Don't forget to buy some good cables and ferrules for crisp shifts!

Shimano Ultegra 6500 Front Derailleur -- The FD-6500 Ultegra front derailleur features an extra wide cage to increase strength and extends service life. Indexed for light-action SIS shifting. 9 speed compatible, nickel-plated aluminum cage.

Shimano Dura-Ace 7800 Front Derailleur -- Radical improvement in front shifting is one of the most significant advances in the new Dura-Ace. The 7800 Dura-Ace front derailleur still offers the legendary performance you'd expect from Shimano drivetrain components, but has been tweaked to accomodate the new 10 speed drivetrain. The cage is now narrower and stiffer with reinforced pivots and stronger construction. That translates into better and more responsive front shifting performance. 75 grams.

Shimano Ultegra 6600 Front Derailleur -- 10 speed compatible, nickel-plated aluminum cage with more narrow and stiffer with reinforced pivots than the 6500 model. Braze-on, 89 grams.

Shimano 105 RD-5501 9 Speed Rear Derailleur -- Silver Short Cage, compatible with double craksets. For use with 9 speed drivetrain. The Shimano 105 Rear Derailleur is compatible with 8 and 9 speed cassettes.

Shimano Dura-ace 7700 Rear Derailleur -- Short cage, compatible with double craksets. 9 speed compatible. Sealed pulley bearings reduce friction and run longer. Extension coil spring and self lubricating micro-machined bushings reduce friction for low-effort shifting. Cold forged aluminium construction for low weight without compromising strength. Pulleys are made of tough DuPont Zytel for longer life and less chain noise. 195 Grams

Shimano Ultegra 6500 GS Rear Derailleur -- These RD-6500-GS long cage rear derailleurs are for triple cranksets, 9 Speed Compatible, 11-Tooth Pulleys Alternate contact with chain links reduceing wear, larger pulley diameter runs smoother and lasts longer. Ultegra 9 speed rear derailleurs are compatible with both Ultegra and Dura-Ace shift levers. Compatible with cassettes with a maximum of 27 teeth.

Shimano 105 RD-5600 Rear Derailleur -- Short cage, compatible with double craksets. For use with 9 and 10 speed drives by changing cable mount positions. A wider outer link with increased rigidity allows this derailleur better shifting.

Shimano Dura-ace 7800 Rear Derailleur -- FREE Shipping within the Continental USA! Short cage, compatible with double craksets. For use with 9 and 10 speed drives by changing cable mount positions. A wider outer link with increased rigidity allows this derailleur better shifting. A cold-forged aluminum body, improved bearings, and an upgraded finish. 180g

Shimano Ultegra 6600 Rear Derailleur -- Compatible with double craksets. For use with 9 and 10 speed drives by changing cable mount positions. A wider outer link with increased rigidity allows this derailleur better shifting. A cold-forged aluminum body and a 11 tooth sealed cartridge bearing pulleys reduces both wear and friction to all moving parts. 209 grams.

Shimano Dura-Ace Derailleur Cable Set -- Includes 3 sections of gray 4mm housing 600mm x2, 320mm x 1. Two stainless 1.2mm x 2000mm inner cables. Cable ends and ferrules included.

Shimano Stainless Steel Derailleur Cable -- Stainless Steel Shimano derailleur cables are just like the originals that came with your shimano components. Shimano original parts. 1.2mm x 2000mm inner cables. **Housing sold separately** Not compatible with SRAM Grip Shift shifters.

Shimano 4mm Sealed Ferrules -- Compatible with 4mm Derailleur housing. These ferrules are speciallly designed to seal out dirt and grime. Just what you need for CRISP shifts! Available with a nipple for added protection.