Shimano Sora Front Derailleur

Other products in the category Drivetrain / Road Derailleurs:

Shimano 105 FD-5501 Front Derailleur -- These shimano 105 front derailleurs are compatible with 9 speed rear derailleurs and Tiagra / 105 / Ultegra / and Dura-Ace Shifter Levers.

Shimano Dura-Ace 7700 Front Derailleur -- Shimano's top of the line racing front derailleur! Nickel plated alloy chain cage reduces weight and increases abrasion resistance. The extra-wide pivot link increases overall stiffness and shifting quality. Designed specifically for use with Shimano SG-X chainrings. Compatible with 105 and Ultegra shifters too! Don't forget to buy some good cables and ferrules for crisp shifts!

Shimano Dura-Ace 7800 Front Derailleur -- 10 speed compatible, nickel-plated aluminum cage with more narrow and stiffer with reinforced pivots than the 7800 model. Braze-on, 75 grams.

Shimano FD-2203 Front Derailleur -- These shimano FD-2203 front derailleurs are compatible with 8 speed rear derailleurs and Tiagra / 105 / Ultegra / and Dura-Ace Shifter Levers. Wide pivot link. Triple SG-X chainwheel compatible. Capacity 22T.

Shimano Ultegra 6500 Front Derailleur -- The FD-6500 Ultegra front derailleur features an extra wide cage to increase strength and extends service life. Indexed for light-action SIS shifting. 9 speed compatible, nickel-plated aluminum cage.

Shimano Ultegra 6600 Front Derailleur -- 10 speed compatible, nickel-plated aluminum cage with more narrow and stiffer with reinforced pivots than the 6500 model. Braze-on, 89 grams.

Shimano 105 RD-5501 9 Speed Rear Derailleur -- Silver Short Cage, compatible with double craksets. For use with 9 speed drivetrain. The Shimano 105 Rear Derailleur is compatible with 8 and 9 speed cassettes.

Shimano Dura-ace 7700 Rear Derailleur -- Short cage, compatible with double craksets. 9 speed compatible. Sealed pulley bearings reduce friction and run longer. Extension coil spring and self lubricating micro-machined bushings reduce friction for low-effort shifting. Cold forged aluminium construction for low weight without compromising strength. Pulleys are made of tough DuPont Zytel for longer life and less chain noise. 195 Grams

Shimano Dura-ace 7800 Rear Derailleur -- FREE Shipping within the Continental USA! Short cage, compatible with double craksets. For use with 9 and 10 speed drives by changing cable mount positions. A wider outer link with increased rigidity allows this derailleur better shifting. A cold-forged aluminum body, improved bearings, and an upgraded finish. 180g

Shimano Ultegra 6500 GS Rear Derailleur -- These long cage rear dearilleurs are for triple cranksets, 9 Speed Compatible, 11-Tooth Pulleys Alternate contact with chain links reduceing wear, larger pulley diameter runs smoother and lasts longer. Ultegra 9 speed rear derailleurs are compatible with both Ultegra and Dura-Ace shift levers. Compatible with cassettes with a maximum of 27 teeth.

Shimano Ultegra 6600 Rear Derailleur -- Short cage, compatible with double craksets. For use with 9 and 10 speed drives by changing cable mount positions. A wider outer link with increased rigidity allows this derailleur better shifting. A cold-forged aluminum body and a 11 tooth sealed cartridge bearing pulleys reduces both wear and friction to all moving parts. 209 grams.

Shimano Dura-Ace Derailleur Cable Set -- Includes 3 sections of gray 4mm housing 600mm x2, 320mm x 1. Two stainless 1.2mm x 2000mm inner cables. Cable ends and ferrules included.

Shimano Stainless Steel Derailleur Cable -- Stainless Steel Shimano derailleur cables are just like the originals that came with your shimano components. Shimano original parts. 1.2mm x 2000mm inner cables. **Housing sold separately** Not compatible with SRAM Grip Shift shifters.

Shimano 4mm Sealed Ferrules -- Compatible with 4mm Derailleur housing. These ferrules are speciallly designed to seal out dirt and grime. Just what you need for CRISP shifts! Available with a nipple for added protection.

Related Products

Shimano Stainless Steel Derailleur Cable