Shimano STX-RC Front Derailleur

Other products in the category Drivetrain / MTB Derailleurs:

Shimano Deore LX M570 Front Derailleur -- These Deore LX Top Swing Front derailleurs are compatible with 9 speed drivetrains. Top Swing = Clamp on bottom Bottom Swing = Clamp on top 28.6 = 1 1/8" 31.8 = 1 1/4" 34.9 = 1 3/8"

Shimano Deore LX M570 G Front Derailleur -- These highly sought after limited edition Deore LX Top Swing Front derailleurs are compatible with 9 speed mountain bike drivetrains. Get them while supplies last at an incredible price! Top Swing = Clamp on bottom Bottom Swing = Clamp on top 28.6 = 1 1/8" 31.8 = 1 1/4" 34.9 = 1 3/8"

Shimano Deore LX M570 G Type E Front Derailleur -- These highly sought after limited edition Deore LX Type E Front derailleurs are compatible with 9 speed mountain bike drivetrains. Get them while supplies last at an incredible price! Type E = Mounts to bottom bracket

Shimano Deore LX M571 G Front Derailleur -- These highly sought after limited edition Deore LX Bottom Swing Front derailleurs are compatible with 9 speed mountain bike drivetrains. Get them while supplies last at an incredible price! Top Swing = Clamp on bottom Bottom Swing = Clamp on top 28.6 = 1 1/8" 31.8 = 1 1/4" 34.9 = 1 3/8"

Shimano Deore XT M750 Front Derailleur -- The Shimano FD-M750 features a reinforced chain guid offering high strength and rigidity for improved shifting response. 123 grams - Designed specifically for use with super-narrow 9 speed chains. - Special cross section increases Chain Cage rigidity for improved shifting response Top Swing = Clamp on bottom Bottom Swing = Clamp on top 28.6 = 1 1/8" 31.8 = 1 1/4" 34.9 = 1 3/8" Type E = Mounts To Bottom Bracket

Shimano Deore XT M751 Front Derailleur -- The Shimano FD-M751 features a reinforced chain guid offering high strength and rigidity for improved shifting response. 123 grams - Designed specifically for use with super-narrow 9 speed chains. - Special cross section increases Chain Cage rigidity for improved shifting response Top Swing = Clamp on bottom Bottom Swing = Clamp on top 28.6 = 1 1/8" 31.8 = 1 1/4" 34.9 = 1 3/8" Type E = Mounts To Bottom Bracket

Shimano Deore XT M760 Front Derailleur -- The new XT 760 front derailleur is designed to work perfectly with the new 760 crankset / bottom bracket combo, moving the chain quickly and smoothly from ring to ring. A wide link design provides greater torsional rigidity, improving shifting response and service life. It's a snap to setup, too, with a multi-clamp band design that works for all three seat tube diameters, and a dual pull design that allows it to be used with either top or bottom cable routing. Top Swing = Clamp on bottom Bottom Swing = Clamp on top 28.6 = 1 1/8" 31.8 = 1 1/4" 34.9 = 1 3/8" Type E = Mounts To Bottom Bracket

Shimano Deore XT Type E M750 Front Derailleur -- The Shimano FD-M750 features a reinforced chain guid offering high strength and rigidity for improved shifting response. 123 grams - Designed specifically for use with super-narrow 9 speed chains. - Special cross section increases Chain Cage rigidity for improved shifting response Top Swing = Clamp on bottom Bottom Swing = Clamp on top 28.6 = 1 1/8" 31.8 = 1 1/4" 34.9 = 1 3/8" Type E = Mounts To Bottom Bracket

Shimano XTR Front Derailleur -- Differential plate action model - both inner and outer cage plates move independently to improve shifting. The new dual pull design allows this derailleur to be used with both top and bottom pull cable routing, so you can take it with you if you ever switch frames. - Designed for 44, 46, or 48t large chainrings - 22-tooth capacity (large ring teeth minus small ring teeth determines capacity) - Links are forged and anodized - Nickel-plated alloy cage is durable and light Top Swing = Clamp on bottom Bottom Swing = Clamp on top 28.6 = 1 1/8" 31.8 = 1 1/4" 34.9 = 1 3/8" Type E = Mounts To Bottom Bracket

Shimano Alivio MC20 Rear Derailleur -- Shimano RD-MC20 Alivio Rear Derailleur 8 speed SGS - Cage Length: Long - Drivetrain Compatibility: Shimano 8 - Largest Cog: 30 teeth - Chain Wrap Capacity: 39 teeth

Shimano Deore LX SGS M570 Rear Derailleur -- True to its high-end roots, 7, 8, and 9 speed compatible. 11T pulley reduces wear by alternating tooth contact. The large diameter pulley and fluorine coated inner pin pivot bushings. SGS/long cage 290g

Shimano Deore LX SGS M580 Rear Derailleur -- - SGS 45T max sprocket - 11T pulleys run quieter and wear longer due to alternating tooth contact between inner and outer chain plates - Rapid rise reverse action coil spring allows the derailleur to down shift with the cable release - Rapid rise action reduces shifting effort, it also allows the right and left lever sets to operate the same way - Weight: 311 grams

Shimano Deore M510 Rear Derailleur -- True to its high-end roots, 7-9 speed compatible. 11T pulley reduces wear by alternating tooth contact. The large diameter pulley and fluorine coated inner pin pivot bushings. SGS/long cage 300g

Shimano Deore XT M760 SGS Rear Derailleur -- New M760 rear derailleurs feature Shimano’s Low Normal Return Spring, that lends to incredibly intuitive operation when combined with Dual Control shift levers. The Shimano XT Rear Derailleur Mega-9 SGS M760 enhances and allows for pre-selection of inward shifts, especially in varying terrain. Narrow Hyper Glide design delivers consistent shifting on 9 speed cassettes. - Wide link design increases rigidity - Rubber Bumper reduces noise - Low Normal Return Spring - smoother shifts to larger cogs - Sealed Bearing Tension Pulley - Double O-ringed Pivot Seals

Shimano XTR M960 SGS Rear Derailleur -- The M960 incorporates a new outer link, which increase pivot joint rigidity. Mega-9 compatibility ensures smooth, positive, light action shifting on 9 speed drivetrains. Each pulley uses an oversize, 11 tooth design which offers smooth, low friction rotation, thanks to sealed bearings. Features Shimano's low normal return spring, enhancing shifting action to larger cogs under load. 8 and 9-speed compatible. Fluorine coated low friction pivot bushings. 200g

Shimano Stainless Steel Derailleur Cable -- Stainless Steel Shimano derailleur cables are just like the originals that came with your shimano components. Shimano original parts. 1.2mm x 2000mm inner cables. **Housing sold separately** Not compatible with SRAM Grip Shift shifters.

Shimano 4mm Sealed Ferrules -- Compatible with 4mm Derailleur housing. These ferrules are speciallly designed to seal out dirt and grime. Just what you need for CRISP shifts! Available with a nipple for added protection.