Truvativ Rouleur Carbon GXP Crankset

Other products in the category Drivetrain / Cranksets:

Ritchey Logic Pro Road V Crankset -- Ritchey cranks have always been cold forged and the V series crank is their strongest yet. The low Q Factor V series cranks focus design strength at the pedal and BB interfaces where the greatest stresses occur. The elegant face sports a concave surface on the arm shaving excess material from this low stress area. 130 bolt pattern fits Shimano and most other aftermarket chainrings. Uses Shimano Octalink splined spindled bottom bracket.

Shimano 105 FC-5502 Road Crankset -- Shimano replaced their 5500 cranks with the redesigned 5502. FC-5502 Cranksets come with SG-X chainrings. SG-X outer rings have steel chain pick-up tabs riveted to the inner face for positive up shifts. Tunnel-forged hollow arms compatible with BB-6500 or BB-5500 bottom bracket. Incredible Deal On Boxed CrankSets!

Shimano Dura-Ace 7701 Crankset -- Free Shipping On Most Orders $100+ 7700 series cold forged hollow aluminum crank arms, alloy chainring bolts, and nickel plated SG-X chainrings. 9 Speed Compatible. We recommend using a Shimano Ultegra 8-spline V1 109.5mm BB-6500 Bottom Bracket with these as the Dura-Ace ones wear out too quickly.

Shimano Ultegra 6500 Crankset -- The Shimano cranksets have hollow tunnel forged arms, alloy chainring bolts. Compatible with Shimano 8-spline bottom brackets, and 9 speed drive trains. SGX chainrings provide superior chain control for fast and positive shifting. Aluminum anodized chainrings. Great deals on boxed sets while they last!

Shimano XTR M960 Crankset -- FREE Shipping within the Continental USA! Shimano Deore XT FC-M960 Triple cranksets The M960 XTR crankset from Shimano is the pinnacle of crank and bottom bracket design. Shimano has taken years of knowledge about crankarm design and paired it with the ultimate in engineering to produce an integrated design that is 70 grams lighter than conventional parts. The redesign starts with the new forging process. The arms are Shimano's Hollowtech II technology, featuring a hollow core for light weight and a tubular structure for strength and stiffness. The oversize bottom bracket spindle is permanently attached to the right crankarm via a press fit, allowing the bearings to be placed far wider apart, yielding increased rigidity and bearing surface life. Bearings are sealed cartridges, ensuring that they'll be turning smoothly for a long time. The Mega-9 compatible chainrings are designed for improved shifting control when paired with the narrow 9 speed chains. 800 Grams! Please note: This item includes both crankarms with rings. The integrated bottom bracket and cup installation tool are sold separately.

Sram Truvativ Rouleur GXP Crankset -- Incredible deal that just can't be beat on 10 speed compatible cranks while supplies last! The perfect compliment to Sram Force and Rival components. High performance Truvativ Trushift ramped and pinned AL-7075-T6 metal polished chain rings with CNC details, 4mm outer ring, ramped and pinned. Giga X Pipe (GXP)- A external bearing system with 3D forged, heat treated and CNC'd 24mm OD CrMo spindle integrated with right crank arm with integrated non-driveside alloy self extracting bolt system and dual hex key chainring bolts for easy assembly without a special t-nut or spanner tools. 815g compact, 825g standard - Shimano 10 speed compatible - Campagnolo 10 speed compatible - GXP Bottom Bracket Compatible - Bottom Bracket Sold Separately

Truvativ Firex Single Speed Crankset -- Incredible deal on a quality single speed crankset while supplies last! Crank bolts included. ISIS cranksets use a splined pattern that is not Shimano compatible. - 4 bolt 104bcd, 170mm, 33 Teeth - ISIS Bottom Bracket Compatible - Bottom Bracket Sold Separately

Truvativ Hussefelt Single Speed Crankset -- Forged 1-piece AL-6061-T6 construction Heat-treated patent-pending cromoly pedal thread inserts. Crank bolts included. ISIS cranksets use a splined pattern that is not Shimano compatible. - Durable anodized finish - Cold formed & CNC'd - High impact P.C. Bashguard - Black anodized AL-7075-T6 chainrings - 4 bolt 104bcd, 175mm, 36 Teeth - Bottom Bracket Sold Separately

Shimano Deore XT M760 Crankset -- Shimano Deore XT FC-M760 Triple cranksets Same integrated crank and bottom bracket setup that has worked so well for the XTR components. Just like it's big brother, the hollow bottom bracket spindle is permanently attached to the right crankarm. After assembling the huge, outboard bearing bottom bracket, the left crankarm is secured with a pinch bolt. The result is a crank/BB setup that is stronger, stiffer, and lighter than other designs. The arms use the same Hollowtech forging technology. They're lightweight and extremely reliable. In tandem with the hollow chromoly spindle these are the strongest cranks going.

Shimano Dura-Ace 7800 Crankset -- 10 speed compatible Hollowtech® II design with nickel plated chain rings for maximum weight savings. BB-7800 bottom bracket sold separately. 130mm bolt pattern. 730 grams. FREE Shipping within the Continental USA!

Shimano Ultegra 6600 Crankset -- FREE Shipping within the Continental USA! 10 speed compatible Hollowtech II design with nickel plated chain rings for maximum weight savings. BB-6600 bottom bracket sold separately. 130mm bolt pattern. 823 grams.

Sram Force Integrated Carbon Spider Crankset -- Competition focused technology for serious riders: light weight, strength, and durability come together in the Force Crankset. Thanks to integrated carbon-spider design, the Force is SRAM’s lightest crankset, weighing in at only 665g. A 6k carbon weave, developed and perfected in SRAM’s own dedicated carbon fiber manufacturing facility, yields a one piece design that’s lighter and stiffer than traditional cranks. The arms are finished with a unidirectional graphite sheet and clear coat for a deep, lustrous finish. The Force Crankset uses our exclusive hard-anodized PowerGlide chainrings for long lasting performance.

Sram Rival OCT Crankset -- The Rival Crankset shows the way forward for any serious cyclist, putting power to the road while saving weight at the same time. Utilizing Open Core Technology, the OCT Crankset’s crank arms are hollow-forged out of AL-6066 alloy for maximum strength and mount our new PowerGlide 10 speed chainrings. Weighs only 725 grams.

Allen Style Crankset Bolts -- These bolts allow you to fasten your cranks with just an allen wrench. Beats using dust caps that hold the moisture in causing your bolts to rust and seize!

Ritchey Logic Titanium Crankset Bolts -- Ritchey Logic titanium crank bolts are compatible with all conventional cranksets including Shimano, Campagnolo, and Truvativ. These have a raised edge that help prevent slipping. Compatible with 14mm socket wrench. Made In The USA!

Sugino Crankset Bolts -- If you need a new set of highly polished crank bolts then you are in the right place!

Black Aluminum Chain Ring Bolts -- Set of 5 Aluminum chain ring bolts compatible with all double cranksets,and the outer 2 chainrings of most triples. Just 10 grams per set!

CroMo Chain Ring Bolts -- Set of 5 CroMo chain ring bolts compatible with all road and mountain bike cranksets.

Truvativ Trushift Compact Chainring -- Worn chain rings can hamper shifting. Replacing your OEM chain rings with a new high performance ramped and pinned chain rings will provide improve shifting, save on chain wear, and help eliminate that annoying chain suck. Ideal for compact cranksets.

FSA Pro Road 9/10s Chainring -- FSA Pro Road rings are CNC machined, black anodized 7075-T6 aluminum. All rings are 8/9/10-speed compatible while outer rings are ramped and pined for better shifting.

Real Mountain Bike Chain Rings -- Worn chain rings can hamper shifting. Replacing your OEM chain rings with a new high performance ramped Real chain rings will provide improve shifting, save on chain wear, and help eliminate that annoying chain suck.

Shimano Dura-Ace 7700 9 Speed Chain Ring -- These Shimano chain rings are compatible with all Shimano road cranksets regardless of model.

SR Granny Gear Chain Ring -- These rings are designed to work with both 8 & 9 speed drive train systems. Available in 24 tooth 74 BCD five bolt chain ring patterns.

Vuelta MTB Chain Ring -- These rings are designed to work with both 8 & 9 speed drive train systems. Available in 110 BCD (Shimano) or 58 BCD five bolt chain ring patterns.

Vuelta Road Chain Ring -- These rings are designed to work with both 8 & 9 speed drive train systems. Available in 130 BCD (Shimano) or 135 BCD (Campagnolo) five bolt chain ring patterns.

Park Tool CCP-2 Square Taper Crankset Puller Wrench -- Park Tool's Crank Puller has set the industry standard for over 20 years! The CCP-2’s long, dipped vinyl handle provides a comfortable grip and plenty of torque, while Park’s own floating tip delivers smooth operation and a long, trouble-free life. Not compatible with splined style bottom brackets.

Park Tool CCP-4 Splined Taper Crankset Puller Wrench -- Park’s CCP-4 has been specifically designed to remove the new Shimano splined cranks, oversized pipe billet spindles and ISIS splined crank systems. The CCP-4’s long, dipped vinyl handle provides a comfortable grip and plenty of torque, while Park’s own rotating tip delivers smooth operation and a long, trouble-free life. Note: the CCP-4 will not fit standard square bottom bracket spindles.

Park Tool CNW-2 Chain Ring Bolt Wrench -- This handy tool fits securely into the slots on the reverse side of a chainring bolt so it doesn't spin when loosening the bolt. Designed specifically for the job, the CNW-2 makes removing chainring bolts much easier. (Chainring bolts not included)

Shimano TL-UN75 Crank Tool -- Designed for use in conjunction with TL-UN96 / BBT-8 Park / or equivelent bottom bracket tool, sold separately. For removal and installation of FCM750/FCM739/FCM570/FCM569/FCMC40 inner chain rings. Prevents slipping and damaging your expensive cranks.

X-Axis 10mm Crankset Bolt Tool -- The X-Axis crank bolt wrench allows you that extra leverage that is often required to get stubborn bolts loose. X-Axis Tools are made right here in the USA! They are CNC machined from from high modulus steel and are Aximite Heat Treated. So in other words they are extemely well built and STRONG!

Related Products

Sram Force Braze-on Front Derailleur

Sram Truvativ GXP Bearing Bottom Bracket